Step 1-Getting into Blunt
If you don't know how to do this I'll try to explain.
You want to roll to the ramp you are trying this on with more speed then a rock to fakie but less speed then airing out of it, get enough speed to roll out of it.
Lean back and lift up your front truck and when you back wheels hit the coping try to slam your tail up by pushing it foward. Lean a little bit over to stay in the blunt but not to far otherwise you will get out of it.
Step 2- Popping it back in
Practise going into rock first so you will get jist of popping it in the ramp. You can do that by pushing on your back foot, It isn't the same as ollieing because you don't pop you push down and lean back.
Step 3 - Landing
Okay don't wind up your shoulders until you get into blunt. Once your in blunt shift your weight from foward to back when your are going to pop it back it in the ramp. Make sure your shoulders arn't to winded up to much as you only need to go 90 degress then pivot.
You have popped it back in and are floating into the ramp and spinning very slightly. When you land make sure you land in manual and be leaning more heelside so you don't fall foward. As soon as you land in manual pivot the rest with your shoulders first then your board and just put the front truck down do not slam them just do it lightly
Pump when you get towards the end to make it look good.
