[Tom-E]

A new page entry has been added:

Flatbar Rail

First, Click Here to open up a new page that has pictures for this rail.Materials: One 1 inch 3 sided rail 16 feet, some flat metal for the stands of the rail and someone who has everything they need and are able to weld this kind of stuff. (Friend from metal class, dad, uncle... whatever).

[doaner]

that's a dumb ass paln because it takes way too long and it looks like shit. if you want a better plan... liten to this..

first get two 2 by 4's that are about 2 feet long. these will be your stands or your base.

then cut 4 blocks of 2 by 4s. these will be the legs of the rail. nail them together and then nail them to your bases.

now get a 10 foot long 2 by 4 and nail it on the legs. (make sure the wider part is facing up. **it makes it easier to grind.**)

now buy a 4 inch wide piece of sheet metal that is 10 feet long. drill small holes at the begining, middle, and the end. now screw the sheet meatl onto it.

this is going to be an inexpensive rail that will allow gnarly grinds.

*the other plan sucks!**

[DoctorVolcom]

Originally Posted by doaner

that's a dumb ass paln because it takes way too long and it looks like shit. if you want a better plan... liten to this..

first get two 2 by 4's that are about 2 feet long. these will be your stands or your base.

then cut 4 blocks of 2 by 4s. these will be the legs of the rail. nail them together and then nail them to your bases.

now get a 10 foot long 2 by 4 and nail it on the legs. (make sure the wider part is facing up. **it makes it easier to grind.**)

now buy a 4 inch wide piece of sheet metal that is 10 feet long. drill small holes at the begining, middle, and the end. now screw the sheet meatl onto it.

this is going to be an inexpensive rail that will allow gnarly grinds.

*the other plan sucks!**

Shut up,Yours ain't any better.

[Duff rider]

that is way to hard I'll just go buy one from ccs or something

[Duff rider]

that's 10x worse than tom-e rail

[sk8er6]

i build ramps, and not to be cocky, but yeah, this isnt exactly the best shit for the price. rather go with a wooden stand PVC double pipe rail. like so...

[I_live_to_skate]

id rather order a rail then make it
im fine with making ramps just not rails

[cracker]

Originally Posted by I_live_to_skate

id rather order a rail then make it
im fine with making ramps just not rails

Yeah cause if you dont know a welder then it almost comes out to be the same price because welders are as expensive if not more as plumers, electricians, mecanics, ect....

So the rail might end up costing a little less than one from ccs or a mojo rail. So in the end its better to buy it because the rail will be nicely wax and you will be able to ajust it so that you can make it higher as you get better.

[mekoisdego]

Originally Posted by I_live_to_skate

id rather order a rail then make it
im fine with making ramps just not rails

Yeah that's the way i'd go.

[E-T]

the second link doesnt work

[Zeker182]

my uncle welded me a rail for 10 bucks. he found all the metal at a junk yard and its a lot better than any store bought rail i've ever skated

[4ndyDaEmcee]

Cool...

[RyanSk8r99]

i have the best plan.

JUST BUY ONE

its only about $100 and you have 3 different height settings.

[jada542]

very cool!!!!!

[jada542]

i love it!!!