Results 1 to 15 of 15
  1. #1
    skaterman250's Avatar
    Title
    Member
    Join Date
    Jan 2007
    Location
    nashville
    Posts
    3,600

    Default how to make a manual pad

    Ok this is simple to make.
    It will be 8 foot long and 4 foot wide and 7 inches high.

    What you need
    screws or nails.
    1 piece of 3/4 plywood
    2 2x6s
    1 piece of 3/8 ply wood or anyother rideable surface

    and thats all

    tools.
    drill or hammer
    saw.
    measuring tape.


    steps.
    1. cut each 2x6 in half so youll have 4 4 foot long pieces of 2x6
    2. next every 2 feet in you 3/4 sheet of ply wood draw a line you should have 4 lines if its 8 feet long.
    3.drill in the 2x6s in the plywood where every line is which they should be spread out equaly if you spaced them right.
    4.now you have a manny pad but just add the second layer of wood to it and drill ir over the first sheet.(for this you can use plywood masonite or any kind.) now its ready to skate.


    Adititonal How to add coping.

    Materials
    1 8 foot piece of steel cornering.(Thicker the better just not to thick)
    screws
    drill bits.

    steps
    The thicker the metal is the better so theres less chance youll mess up

    1.every 2 feet with the drill bit make sure its bigger than the screws head start drilling through the metal dont go all the way through this step is so when you put the screw in it wont be sticking out.
    2.Now if you did step 1 correctly there will be 2 lowered parts. next put the coping up to the manny pad.
    3.drill it in to the manny pad through the holes in it.
    4. skate it



    only picutre i got.

    this one i only 6 feet long didnt have room to store full 8 feet if you wnat shorter follow all the steps but just cut the wood shorter. and get shorter coping for however long you made it.
    Last edited by skaterman250; 11-14-2007 at 01:22 PM.

  2. #2
    4ndyDaEmcee's Avatar
    Title
    Member
    Join Date
    Feb 2007
    Location
    UK
    Posts
    3,206

    Default

    Argh, I really want to make one, but I have no driveway. :(

  3. #3
    skaterman250's Avatar
    Title
    Member
    Join Date
    Jan 2007
    Location
    nashville
    Posts
    3,600

    Default

    street garage? side walk? just store it in you backyard and bring it out

  4. #4
    sweet lou52's Avatar
    Title
    Member
    Join Date
    Nov 2007
    Location
    in a hot pit of tar
    Posts
    191

    Default

    it looks liek your back foot is touching, and btw did u like tottaly steal this from transworlds last issue????
    If you ever pushed a door that said pull put this in your sig.

  5. #5
    skaterman250's Avatar
    Title
    Member
    Join Date
    Jan 2007
    Location
    nashville
    Posts
    3,600

    Default

    Does it matter if it touches? It was took like 3 months ago when i couldnt do it consistnatly. anyways its just a picture showing what it looks like.

    no i just made it up i made that manual pad like 4 months ago and i just gave plans from what i did. why did htey have on like this?

    http://www.youtube.com/watch?v=3opmxUv4Lks

    Proof look at the date added.

    ha ha ha i was so bad when i made this
    Last edited by skaterman250; 11-14-2007 at 01:40 PM.

  6. #6
    CasperGuy's Avatar
    Title
    Member
    Join Date
    Oct 2005
    Location
    belgrade
    Posts
    1,807

    Default

    blanks ftw nice manny pad !! posi for the instructions

    ANARCHY FOR A FREE HUMANITY - SOLIDARITY FROM GREECE

  7. #7
    Zemba's Avatar
    Title
    Respected User
    Join Date
    Mar 2007
    Location
    Apollo, PA
    Posts
    4,166

    Default

    This has inspired me to make a manual pad of some sort.

  8. #8
    theantihero's Avatar
    Title
    Member
    Join Date
    Jun 2006
    Location
    Canada
    Posts
    3,822

    Default

    Nice.

    Manny pads rool.

  9. #9
    Dominionskate's Avatar
    Title
    Respected User
    Join Date
    Jan 2007
    Location
    Richmond, Virginia
    Posts
    6,752

    Default

    Yeah I wanna make a manny pad one day. Al if have is a box but it is only about 1 foot wide.
    Only manny trick i can do is ollie manual and if had one to practice I know I could have more.

  10. #10
    skaterman250's Avatar
    Title
    Member
    Join Date
    Jan 2007
    Location
    nashville
    Posts
    3,600

    Default

    i dont use it that much i need to star all i can do is ollie manual shuv it out and almost ollie nose manual have took time to learn those.

  11. #11

    Title
    Junior Member
    Join Date
    Feb 2009
    Posts
    12

    Default

    nice manny pad

  12. #12

    Title
    Perma Banned
    Join Date
    May 2008
    Location
    fresno, CA
    Posts
    357

    Default

    Nice bump there faggot.

  13. #13

    Title
    Junior Member
    Join Date
    Aug 2010
    Posts
    1

    Default

    how heavy is it?

  14. #14
    xninjadude03's Avatar
    Title
    Respected User
    Join Date
    Jul 2009
    Location
    Interzone
    Posts
    5,607

    Default

    Nice bump there faggot.
    Quote Originally Posted by Gangsta_Fresh View Post
    ay yo i wasnt looking for the boners. the boners were looking for me.

  15. #15
    GetThunderStruck's Avatar
    Title
    soldier of the streets
    Join Date
    Aug 2005
    Posts
    10,420

    Default

    Another easy manny pad, steal one of those wooden palettes from behind stores (no one cares about them) and nail a piece of plywood to the top. You don't even have to nail it, but it helps. You can stack them for extra challenge.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •