PDA

View Full Version : setup


Flaredancer
11-25-2006, 03:18 PM
hi i was wondering...
im gettin a new board so im thinkin of this setup:

blank popwar deck
solid blank spitfire 52mm wheels
phantom or grind king truks(which is better?)
black magic griptape
abec7 bones bearings


is that a good setup?

PS i mightve put this in the wrong forum, i apologize.

Seaker9
11-25-2006, 03:24 PM
Krux is better. Everything else is fine.

Flaredancer
11-25-2006, 03:33 PM
Krux is better. Everything else is fine.

okay are krux expensive???
(not too much $$$ on me):'( lol jk :)

Skating Forever Even in Heaven
11-25-2006, 03:37 PM
hi i was wondering...
im gettin a new board so im thinkin of this setup:

blank popwar deck
solid blank spitfire 52mm wheels
phantom or grind king truks(which is better?)
black magic griptape
abec7 bones bearings


is that a good setup?

PS i mightve put this in the wrong forum, i apologize.

blank popwar deck: Good
solid blank spitfire 52mm wheels: Good
phantom or grind king truks(which is better?): Grind King is better but get krux downlows
black magic griptape: No difference
abec7 bones bearings: Get Flip abec 7 bearings.

Then you should be good.

Flaredancer
11-25-2006, 03:38 PM
blank popwar deck: Good
solid blank spitfire 52mm wheels: Good
phantom or grind king truks(which is better?): Grind King is better but get krux downlows
black magic griptape: No difference
abec7 bones bearings: Get Flip abec 7 bearings.

Then you should be good.

ok thanx :P

tweaked
11-25-2006, 03:50 PM
bones doesnt ABEC rate their bearings...so what site is telling you that they are abec 7s?
good setup otherwise