PDA

View Full Version : Krux Downlows

emericaskater443
08-03-2006, 12:45 PM
I have had my downlows for 8 months and they are doing great. The trucks turn nicely and they grind extremely smooth. I have also tried Venture Trucks and Royal. Krux Downlows do not compare at all. They don't only have great bushings, grind super smooth, and are extremely light weight but they are sweet looking :). These trucks also hold up very well. My only complaint for these trucks is the kingpin. To tighten/loosen the truck you must use an allen wrench. This is a problem because it is one of the only trucks that use that... so when you go to the skatepark and if they let you use their tools like my skate shop does it's hard to find a fitting allen wrench. These trucks also do not slide super fast which is good.



Over all Krux have lasted me a long time and I would definitely recommend these to anyone that needs new trucks. Everyone should try these out because they are in my opinion superior over any truck.:D
SkaterForLife117
08-03-2006, 12:48 PM
Nice job for your first review. Just rember to stay away from personal thoughts about the product.
emericaskater443
08-03-2006, 12:49 PM
:)
emericaskater443
08-03-2006, 01:27 PM
are you referring to the pj ladds 'cause this is about trucks?
EmericaSktr51
08-03-2006, 03:02 PM
nice review.
shutupimbleeding
08-03-2006, 03:58 PM
I like it,make it a bit longer and give it paragraphs.
emericaskater443
08-03-2006, 04:51 PM
thanks a lot everyone
A77A96
08-03-2006, 06:20 PM
Nice job for your first review. Just rember to stay away from personal thoughts about the product.
what he said otherwise very nice, you even metion bad points which will help sway a dicision
emericaskater443
08-04-2006, 01:24 AM
thanks i'm gonna try and write something again today... after i get home from the skatepark it might be tomorrow. but skaterforlife117 i'm going to the skatepark with him and he helped me edit that a lil' so yea it'll prolly be tomorrow
mr_torpedo
08-04-2006, 01:28 AM
coll. nice review
lazylife
08-04-2006, 06:10 AM
not bad review but try to make it flow more. It's okay to say don't instead of do not
fallenskater84
08-11-2006, 01:07 PM
great guide although i have seen some of those trucks with the regular kingpin that you can tightin with a skate tool or maybe those were the IIIs?
SkaterForLife117
08-11-2006, 01:22 PM
great guide although i have seen some of those trucks with the regular kingpin that you can tightin with a skate tool or maybe those were the IIIs?
Its the Krux III's that have the regular kingpin, heres a pic.

http://shopimages-ll.ccs.com/r3kb11002.jpg
fallenskater84
08-16-2006, 08:38 PM
[QUOTE=SkaterForLife117]Its the Krux III's that have the regular kingpin, heres a pic.

oh thanks they looked the same i think that krux should make allen wrench that comes with the trucks so you don't have to go though that hassle